Put the ole girl away for the year and though i would share my experiance.
Had a rough start of the season due to a foreign body making it way through and scuffing both cylinders. New top end @ 21 mile rode again scuffed again Cat dropped in a new crate motor and its been good ever since. Ran stock with the exception of the Skinz can which i love and a 148/290 primary spring. Worked alright belt temps were alway pretty hot corded my first belt @180 miles, installed another 083 and it make it 600 miles before i started to pull a cord. Got my 084 installed it broke it in and put it back in my backpack as a spare. RPM never seemed consistent with the 084 even after she had a 100 miles on it. Finally got helix and spring for my Tied about three weeks ago ran it with my current primary setup and it did not work so well, seemed to get "hot" quick and the RPM would fall off. Called Team and MDS and they pointed me in the right direction. I ran it last Saturday RPM was consistent and a schoshe high. Last ride of the year so i didnt take any tuning items short ride plus we were headed to the Beaver Mtn hillclimbs so i wasnt in the mood to mess around. This was my final setup for the year
MDS weights in the Primary with short drilled screw (gram scale reads 74)
Speedwerx white spring 125/340
20 tooth top gear
Team tied with 71/55.36 and black purple spring
Backshift seemed really good but hard to tell due to conditions. Sled would shoot right up to 8K then slowly creep up to 82-83. think i will add a washer to the screw. Might try a little heavier spring in the secondary to make it backshift a hair quicker for my riding style. it was a rather warm day but belt temps and clutch temps were cooler than the 2010 M8 i was riding with. The secondary was always hotter than my primary it must be slipping there a little bit i guess ( GEO& Glen RMK chime in please)???
The sled is a 50th 153 and i weigh probably 240 all geared up.
I did drag race my friends ProClimb HCR several times up a hardpacked slope at Beaver Mountain and his sled was always about two lengths faster than mine, he is also geared down. we swapped sled and got the same result
Im thinking it has to do with something in my setup in the Tied.
Enough about clutching
I installed the Zbroz post and loved it, powder pro skis with the Carls mod another great investment. All in all I am very pleased with the sled, granted it has some first year bugs to work out i have zero regrets about buying it, no grenanded belts, no cracked TCL did have the obnoxious clutch noise that evryone else had. Would i buy another?? Absolutley! Infact i am selling my wifes 2010 M8 sno pro to pick up another 2012 50th anniversery.
This sled has made a more confident rider, i can put it in more technical situation tham my 2010 M with less worry. When i get on my wifes M i feel like i am riding a bathtub around.
Have a great summer all
BTW i put almost 1000 miles on
Had a rough start of the season due to a foreign body making it way through and scuffing both cylinders. New top end @ 21 mile rode again scuffed again Cat dropped in a new crate motor and its been good ever since. Ran stock with the exception of the Skinz can which i love and a 148/290 primary spring. Worked alright belt temps were alway pretty hot corded my first belt @180 miles, installed another 083 and it make it 600 miles before i started to pull a cord. Got my 084 installed it broke it in and put it back in my backpack as a spare. RPM never seemed consistent with the 084 even after she had a 100 miles on it. Finally got helix and spring for my Tied about three weeks ago ran it with my current primary setup and it did not work so well, seemed to get "hot" quick and the RPM would fall off. Called Team and MDS and they pointed me in the right direction. I ran it last Saturday RPM was consistent and a schoshe high. Last ride of the year so i didnt take any tuning items short ride plus we were headed to the Beaver Mtn hillclimbs so i wasnt in the mood to mess around. This was my final setup for the year
MDS weights in the Primary with short drilled screw (gram scale reads 74)
Speedwerx white spring 125/340
20 tooth top gear
Team tied with 71/55.36 and black purple spring
Backshift seemed really good but hard to tell due to conditions. Sled would shoot right up to 8K then slowly creep up to 82-83. think i will add a washer to the screw. Might try a little heavier spring in the secondary to make it backshift a hair quicker for my riding style. it was a rather warm day but belt temps and clutch temps were cooler than the 2010 M8 i was riding with. The secondary was always hotter than my primary it must be slipping there a little bit i guess ( GEO& Glen RMK chime in please)???
The sled is a 50th 153 and i weigh probably 240 all geared up.
I did drag race my friends ProClimb HCR several times up a hardpacked slope at Beaver Mountain and his sled was always about two lengths faster than mine, he is also geared down. we swapped sled and got the same result
Im thinking it has to do with something in my setup in the Tied.
Enough about clutching
I installed the Zbroz post and loved it, powder pro skis with the Carls mod another great investment. All in all I am very pleased with the sled, granted it has some first year bugs to work out i have zero regrets about buying it, no grenanded belts, no cracked TCL did have the obnoxious clutch noise that evryone else had. Would i buy another?? Absolutley! Infact i am selling my wifes 2010 M8 sno pro to pick up another 2012 50th anniversery.
This sled has made a more confident rider, i can put it in more technical situation tham my 2010 M with less worry. When i get on my wifes M i feel like i am riding a bathtub around.
Have a great summer all
BTW i put almost 1000 miles on