B BigRed118 Free Member Dec 21, 2006 1,760 173 63 Jan 7, 2009 #1 Any suggestions on what to check? I know that it is plugged in inside the h/bar switch.
J John ACCOUNT CLOSED Jan 27, 2003 809 36 28 Boise, Id Jan 7, 2009 #2 Most common problem is the contact at the element. Sometimes you can re-solder them.
M m_beeson Free Member Jul 3, 2008 1,870 659 113 Utah Jan 7, 2009 #3 If you are not getting any resistance through it, then it doesn't work. You can try to mend it like John said. If you are getting resistance, then you need to look at the switch, or the power supply, or the ground.
If you are not getting any resistance through it, then it doesn't work. You can try to mend it like John said. If you are getting resistance, then you need to look at the switch, or the power supply, or the ground.
R RockyMtn.Kris Free Member Dec 2, 2001 1,175 86 48 53 Spokane WA Jan 7, 2009 #4 The service manual has the range number for resistence to check the element and the switch with an ohm meter. Did mine this wekend
The service manual has the range number for resistence to check the element and the switch with an ohm meter. Did mine this wekend
