what rpm for m7t

theUltamateTBM · Dec 22, 2013

Im looking for what the right rpm I should be at on my 06 m7t Im trying to get it dialed in but had an issue with over boosting today but it was pulling 8400 rpm with a 689/69 weight with a black spring and a grey torsional setup in rear thanks

mk2g60 · Dec 23, 2013

Small blocks are a bit tricky with clutching. Too much weight very sluggish down bottom not enuff weight then you over rev. My M6T rg I run almost 80g and still pulling 8400 wot any more weight and its very sluggish down low.

theUltamateTBM · Dec 24, 2013

What elevation are u at??

Myzkoo · Dec 24, 2013

I would say aim for 8000rpm. Try using weights that has a heavier tip, thats what i will do on my M7T with 800cc kit. That should aid or at least help the "slugish" bottom end a little. I'm at sealevel with 77g cat weights. Will probably go with the MDS Turbo adjustable weights.

theUltamateTBM · Dec 24, 2013

thanks for the info I will try to shoot for 8000rpm

mk2g60 · Dec 25, 2013

theUltamateTBM said:
What elevation are u at??

0-3500' I use MSD wights right now have also used DD adjustable but they were very doggy on the lower rpm's

Search

what rpm for m7t

theUltamateTBM

Active member

mk2g60

Well-known member

theUltamateTBM

Active member

Myzkoo

New member

theUltamateTBM

Active member

mk2g60

Well-known member

Similar threads