5mm allen Wrench
10 mm wrench
For when your bars move!!!!!!!!!!!!!!!
10 mm wrench
For when your bars move!!!!!!!!!!!!!!!
Tools you may want to Carry with for the Pro
- Thread starter NapaMatt
- Start date
L
While working out on pro in the garage,(not enough snow yet)bars bent right over.Added allen and wrench to tool kit after a good tightening.
A
15mm wrench for adjusting track tension...
R
I just bought the Craftsman Dogbone which has 12mm through 19mm on one tool, as I wasn't sure what all sizes I will need. It seams like a good idea but haven't used it in the field yet.
M
pliers and zip ties along with some black tape always seem to come in handy when my buds are having problems
A magnet it nice also.. if u drop a nut or a bolt!!
Flashlight!!
15 mm Wrench X2
Zip Ties!!
Flashlight!!
15 mm Wrench X2
Zip Ties!!
Safety lockwire ( stronger and smaller than zip ties)
Duckbill pliers- (for exhaust springs etc...)
Knipex plier wrench 7" ( better than a adjustable wrench and opens to 36mm)
Head light ( rather than flashlight.... frees up both hands)
Multi tool
Rope
Duckbill pliers- (for exhaust springs etc...)
Knipex plier wrench 7" ( better than a adjustable wrench and opens to 36mm)
Head light ( rather than flashlight.... frees up both hands)
Multi tool
Rope
Don't forget the duct tape! That will come in handy if you vented your clutch side without the screen material behind it!
Let me guess, These tools can be purchased at Napa!
Yes.. All your tool need..
NAPA Get The Good Stuff!
NAPA Get The Good Stuff!
V
2 wrenches to take the scratchers off. If you break one, you will likely want to remove it so it doesn't cause any damage. Usually need two 9/16" wrenches, but a pair of 14mm might work.
R
Don't forget a number 30 Torx so you can remove the top panel on the hood.
B
You need a T40 for that, but the factory toolkit has one on the end of the spark plug wrench handle.
Rob
TTT
TTT
