1
I did 136 x 2" track scored deal on ebay did 7 tooth drivers from kimpex $30 from dennis kirk , put rmk seat and gas tank and almost done this week
Trail RMK 550 (1999 or 2000) ?? Taller Lug and Longer Track
- Thread starter diamonddave
- Start date
1
New paint job
1
New and old driver
1
Theres the track and striped powder coat off tunnel and polished her up
1
If i knew what i know niw going back 4 months ago i woulda ripped out both coolers buy a u cooler under tunnel and call it a day , re route cooling lines
Looking good! :yo:
I found the 7 tooth drivers to be a good mod. when I installed the 1.75" X 136" on my son's Indy Lite. The reduction in the final drive ratio was very well received by the little 340.
I originally wanted to use the introvert drivers on my install to save cost but I ended up going with the combos instead as I wasn't sure whether I'd have slipping / ratcheting issues.
I found the 7 tooth drivers to be a good mod. when I installed the 1.75" X 136" on my son's Indy Lite. The reduction in the final drive ratio was very well received by the little 340.
I originally wanted to use the introvert drivers on my install to save cost but I ended up going with the combos instead as I wasn't sure whether I'd have slipping / ratcheting issues.
