1100 problem

lundracing

Well-known member

Lifetime Membership

Nov 14, 2011

588

125

43

45

Rolla, ND

• Jan 28, 2014

• #1

Last weekend was out on my m 1100 t blew a new belt in 5 miles. Have over 1000 miles on old one. After digging out the strings from the blower belt put on the original belt. Sled will not run worth a darn now. Clutches seem fine, checked hoses and they seem fine. Sled will not pull hard on hard pack but runs 7900 rpm. Soon as you get in deep snow Boggs down to 7000 rpm. Any ideas.

 

RACINSTATION

Well-known member

Lifetime Membership

Jan 14, 2003

7,503

3,459

113

Idaho

• Jan 28, 2014

• #2

Dis-assemble secondary and check rollers, helix bolts, and bushings.

 

Jeff C

Well-known member

Lifetime Membership

Jul 4, 2001

2,271

1,009

113

59

Mahtomedi, MN

• Jan 29, 2014

• #3

RACINSTATION said:

Dis-assemble secondary and check rollers, helix bolts, and bushings.

Click to expand...

X2

What happens is pieces or fragments of the kevlar get bound up in the helix area, and that in turn binds up the secondary.

Dont believe me? Borrow a buddies secondary,,,,,,,,,, then you will see

 

lundracing

Well-known member

Lifetime Membership

Nov 14, 2011

588

125

43

45

Rolla, ND

• Jan 29, 2014

• #4

Yep, you guys were right on the money. Can not believe the little junk in there was causing that. Thank you