Was wondering if anyone could tell me if the driveshaft on a 2010 dragon is the same as a 2008 dragon 700 or 800, i know the drivers are different just wondering if i could use the driveshaft and put my drivers onto it thanks
Swapping driveshafts?
- Thread starter "Back in Black"
- Start date
Driveshafts may have some cosmetic differences... OEM suppliers through the span of this driveshaft-design life changed.
All IQ (non Racer) Driveshafts are interchangeable from 2006-2010.
There were some different drivers configurations depending on what model/yr you have... some were 2.52" pitch and some were 2.86" pitch.
But... The spline for the shaft was the same in all cases.
All IQ (non Racer) Driveshafts are interchangeable from 2006-2010.
There were some different drivers configurations depending on what model/yr you have... some were 2.52" pitch and some were 2.86" pitch.
But... The spline for the shaft was the same in all cases.
Last edited:
BTW.. when buying a used shaft... I'd always install a new bearing.... you rarely know the actual mileage, how it was maintained or stored... cheap insurance for reliability.
Thanks so much for the help I really appreciate it
