I have a 2014 pro 163. When i installed my Silber turbo i moved the stock map sensor in the air box to the charge tube. AS luck would have it i drove a piece of wood through the side panel and broke the map sensor. I ordered a new map sensor,part # 2411528 which is the right part # according to Polaris parts fiche. The old and the new are both made by Bosch and identical but the #'s on them are different. Is this reason for concern? Turbo has been running excellent! Thanks
Map sensor info please
- Thread starter hontri
- Start date
I thought the stock bar sensor in a charge tube would set off a check engine light.
The oem sensor will only be a 1 bar unit?
And the kit used a 2 bar?
Assuming this is a reflash/remap style kit?
The oem sensor will only be a 1 bar unit?
And the kit used a 2 bar?
Assuming this is a reflash/remap style kit?
Last edited:
You are right ! I did the install 2 years ago and assumed i used the stock map sensor. I did not. I found the original in my parts box. I guess i have to source one from Silber. Thanks again very much!!
Stock is a 2 bar and turbo is a 3 bar
You can order one through a GM dealer or online.
Use GM Part# 55206797
Use GM Part# 55206797
Thanks AK!
Similar threads
