07' M8 Riser Question

M-Slednutz · Oct 13, 2009

Got a two inch riser on my M right now and want to go about four or five if possible. What is everyone doing? Also I want to get some different boards.. dont like kicking snow.. What to get? Cutlers. Better Boards. Eliminators. Or No Snos???

89sandman · Oct 14, 2009

3 inch was pretty tight on my 07, you could probably squeeze a 4 inch in there. on the 07 the nosnos are absolutley the best you can buy. you will not have to ever worry about snow in the boards again. the snoweliminators still have to be kicked out, snow sticks to the aluminum, nosnos are plastic with no snow build up. you will love them i guarantee it

they are my favorite mod on my sled...

Sled Solutions · Oct 14, 2009

WRP Running Boards add strength and solve the problem of snow build up....oh and they look cool!!

RSI risers will get you more height on the bars which we sell also.

richardsb014 · Oct 14, 2009

89sandman is right. Nosnos are the ticket. Installed mine last year and all my buddies were amazed...no snow biuldup.

Going to increase from 2" riser myself. Not sure 4" will work without extensions, but I will try.

Blk88GT · Oct 14, 2009

I use a ROX 5" riser, RSI extended brake line and stock throttle cable to make it all work.

Deanearl · Oct 14, 2009

Just installed the new adjustable Cat handlebars like the 09 M8s on my 07 M8 and there was enough cable for it...I think it raises up to about 4 inches. Couldn't be any longer though I don't think.

m8magicandmystery · Oct 14, 2009

no-snows mean what they say...no-snow...great great product

blackcloud2k · Oct 15, 2009

I have a 4" riser on mine with no extensions. Works just fine. I only had to cut one zip tie to give me plenty of cable. All sleds are a little different but you should be able to pull it off no problem.

jdrmk900 · Oct 15, 2009

riser

i have a 3.5 inch riser on my 07. also have no snows and they are the best mod i have done to date. well worth the money!!!!

Headrush · Oct 15, 2009

I have an Ole's riser on mine its the 3" and works great. 4" would be too tight without doing extensions.

WyoBoy1000 · Oct 15, 2009

4" on mine but I cut the zip tie on the brake line and move the throttle cable to the other side of the motor, plenty of room. I'm 6'6" and 4.5 is all the taller I would go 5 and up is to tall.

XFIRE800 · Oct 15, 2009

I have a 4 inch oles on there with no problems

Skinner · Oct 15, 2009

WyoBoy1000 said:
4" on mine but I cut the zip tie on the brake line and move the throttle cable to the other side of the motor, plenty of room. I'm 6'6" and 4.5 is all the taller I would go 5 and up is to tall.

Thats all I did too.

XFIRE800 said:
I have a 4 inch oles on there with no problems

Went with the ole riser too. Great product

M-Slednutz · Oct 15, 2009

Ya i think i might have to go with the nosnos... I wanna get at least three but might check into goin little more.. where would i get the RSI brake extension.. that looks like it would be the tightest.. anybody got a good deal on some no snos??

CuzzinOlaf · Oct 16, 2009

I have a 5 inch on my 2008. Not sure what is different but I have no extensions at all and it works fine.

Putzy · Oct 16, 2009

I have a 3" rox and I couldn't go much bigger without getting a brake and throttle extension

Rowdy1132 · Oct 17, 2009

bot an oles moves it forward and up. best thing out there, good luck

Search

07' M8 Riser Question

M-Slednutz

Member

89sandman

Well-known member

Sled Solutions

SnoWest Forums Sponsor

richardsb014

New member

Blk88GT

Westbound and down

Deanearl

Member

m8magicandmystery

Well-known member

blackcloud2k

Free Member

jdrmk900

Free Member

Headrush

Well-known member

WyoBoy1000

Well-known member

XFIRE800

Well-known member

Skinner

Well-known member

M-Slednutz

Member

CuzzinOlaf

Active member

Putzy

Member

Rowdy1132

Free Member

Similar threads