Let's see your mod M series!

manlye · Jun 10, 2017

I don't know what it is but I have a soft spot for the modded m-series, it really was one of the greatest sleds ever made. Don't get me wrong I love my new iron, but for some reason I can't get rid of my big HP toys.

I know there are quite a few great m-series still out there, the one winters built, the few Whittaker build, Brad story's mods and the list goes on. Here is my two, let's see what is still out there!

Sent from my iPhone using Tapatalk

gavink16 · Nov 22, 2017

Just picked this up. 1200 miles, 2011 limited stretched to a 162", kmod skid, zbroz front end, slp stage 3 kit, and lots of other goodies in between.

Ddub · Nov 27, 2017

manlye said:
I don't know what it is but I have a soft spot for the modded m-series, it really was one of the greatest sleds ever made. Don't get me wrong I love my new iron, but for some reason I can't get rid of my big HP toys.

I know there are quite a few great m-series still out there, the one winters built, the few Whittaker build, Brad story's mods and the list goes on. Here is my two, let's see what is still out there!View attachment 284614 View attachment 284615

Sent from my iPhone using Tapatalk

That's sick!! What color blue is that?

boondocker97 · Nov 27, 2017

Not too much of a mod, more mod-stock. Original owner 2005 M7, 3500 miles. Peak Head, D&D full single exhaust, reduced fuel pressure, adjusted oil pump, RKTech torsional secondary with 10.4 sheaves, side panel vents, Boss seat, 2009 tunnel update, 2008 float skid, stretched from 153 to 162 with CE extreme 2.5" track, re-valved shocks, and powder pro skis. Fun little backup sled. looks a little meaner with it's black headlight covers in place.

manlye · Nov 27, 2017

Very nice and clean!

Sent from my iPad using Tapatalk

txinmt · Nov 28, 2017

manlye said:
Very nice and clean!

Sent from my iPad using Tapatalk

Not a ton of mods. Love this sled. 2007 M8.

Sent from my iPhone using Tapatalk

Low2earth · Nov 28, 2017

This is my M7. VE backhalf,rails, and Boards. Bdx antistab, and few other goodies. Need to do some clutching, then probably going to boost it.

JordanWilliams · Dec 24, 2017

2006 m7 rktek big bore, ported, 14:1 Head. Skinz can. Geared, 10.4 secondary, 09 tunnel, 2.6 powerclaw. Holz rear skid, floats up front. Powder pro skis. Dual EGT’s AFR gauge.

CATSLEDMAN1 · Dec 28, 2017

M series wayback

I love the old M series, still have one.Don't ride it but just part of the family.

Lots of mods listed, the most critical mod is: GEARING...... all the M sleds were WAY WAY WAY HIGH GEARED, bad deal, many were ditched and bad mouthed, I bought a lot of M7/'s and M1000 for cheap at my shop because the non listening owners were sick of belt burning sluggish performance. When I suggested we gear their sleds down, they always stated: I WANT TO GO FASTER NOT SLOWER". you can't teach a pig to sing.

a properly geared M6 is a formidable sled, an m7 can be even better, m8 and m1000 azz kickers, but stock gearing........old women love them, like a high geared Cadillac.

triple650 · Jan 2, 2018

Here's mine, almost ready for this year. I have spent way more than I'd like to admit in it lol. I'll post more when I'm done

Ddub · Jan 2, 2018

triple650 said:
Here's mine, almost ready for this year. I have spent way more than I'd like to admit in it lol. I'll post more when I'm done

That's sick!!

Ddub · Jan 2, 2018

See if this works.

Ddub · Jan 4, 2018

My project. Have a long way to go. Rk tek ported 1000, 2016 rear suspension and a bunch of other ****.

Reeb · Jan 5, 2018

I've enjoyed my 2006 M7 for years. It's since has gotten a M-10 156 skid and a 156x3 but I haven't had it out since I lost a crank in her.
I have the parts on the shelf, just need to come up with some time to finish a few projects before I get to this old girl.
A few Cutler goodies, some CR Racing stuff.....SLP, Boss, 2Cool, you know the story.

And my buddy has a pretty sweet M8T that he'd built up over the years. The thing is a riot!
Snopro steering really sets this thing apart. I wish it would fit around my twin pipes, for now I just have to ride his every now and then!

Snowmaker11 · Jan 18, 2018

Here is my 06 M7 with D&D racing big bore that is all brand new down the crank, RKTEK billet primary, 10.4 secondary, float skid with Exit shocks, ARS-FX a-arms, conquer 280.

manlye · Jan 23, 2018

How does the 280 track work on the M?

Sent from my iPhone using Tapatalk

Snowmaker11 · Feb 1, 2018

manlye said:
How does the 280 track work on the M?

Sent from my iPhone using Tapatalk

Works good. I had a extensive talk with the guy who developed it last year and a camso rep this year. It is strange but you do need to break in the track. But no rubbing in the tunnel or front cooler.

Bedhead · Feb 4, 2018

M7 still hanging around the garage.

hd4rob · Dec 30, 2018

gavink16 said:
Just picked this up. 1200 miles, 2011 limited stretched to a 162", kmod skid, zbroz front end, slp stage 3 kit, and lots of other goodies in between.

One of my favorite sleds that I have built. Awesome runner and rode like a dream.

manlye · Jan 15, 2019

Sent from my iPhone using Tapatalk

Let's see your mod M series!

Well-known member

New member

Member

Well-known member

Well-known member

New member

New member

Well-known member

Well-known member

Member

Member

Member

Modding mini's

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads