Hi guys, As the title says, I'm curious on how to Identify them? I'm trying to figure out what turbo my sled has, I was googling and visually the only thing I could notice was the 16t had a straight flange off the exhaust and the 19t seemed to have it off kilter at an angle, Is that true or does the 16t also do that too? Thanks!
How to identify a 16T vs 19T?
- Thread starter Octanee
- Start date
Thanks for the reply.
I'm going to assume mine is a 19t but may have been upgraded, I'm pretty sure my sled must of had the 310 kit as I do have the external fuel pump, and the old mcx fish can brain box lol. But my assumption comes as I picked up another apex with a newer kit on it and it's turbo looks identical to mine, I'd figure if it was the smaller one it would look different or smaller but it does not.
I'd still love to have somebody point out or explain the differences if somebody does happen to know
A 19T has a larger compressor housing(prob 5cm for a 16T & 6cm for a 19T) and larger exhaust outlet(not much point in putting more air in if you can't get it out fast enough to keep egts down).
M
I'm pretty certain the 16T is 6 cm and the 19T has the 7 cm housing. I have pics someplace but I've got no idea where they are, that was a long time ago. I know the 15G has the same 7 cm exhaust housing as a 19T, it just has and inferior older style turbine wheel so its fairly easy to make a 15G into a 19T. I used to know all this stuff. LOL.
M5
M5
The 16T & 15G has a 43mm Inducer / 56mm Exducer compressor wheel
The 19T has a 46mm Inducer / 58mm Exducer compressor wheel
The 19T has a 46mm Inducer / 58mm Exducer compressor wheel
S
measure the wheel
16 T has 43.40 mm inner blade tip to tip measurement
19 T has 46.07 mm
Yeah, old posting now but i did have the 16t, I upgraded to the 19t! ?
