J
I have been looking at skinz lower seat but that seems a little pricy. Is there any one else out there that make something similar that is a little more affordable?
Lower seat
- Thread starter Jeff71
- Start date
WRP makes a low seat.
I
Cut the stock one down and have it recovered.
X2 for the WRP!!!
I ran it on one of my Pro's and I now have one on my Axys and I wouldn't go without it !!
It's cut lower and it's a tick longer but for transitioning from left to right and back again, you can definitely tell the difference with it being shorter. This is especially true when you find yourself getting tired, no more boot drag across the top of the seat.
I'm pretty sure I picked mine up for 299.00 off ebay.
https://www.wr-products.com/products/2008-2013-polaris-low-rider
Cut the stock seat, 1'' off the top and an 1 1/2'' off the sides. I'm 5'6'' and its one of the best mods I've done. $65
Also cut 3/4'' off the ends of the handle bars and move all the controls as close to the cross bar as possible.
Also cut 3/4'' off the ends of the handle bars and move all the controls as close to the cross bar as possible.
J
Wrp for 200 bucks sounds great to me. Unless someone knows of any one else making a low one out there?
Just buy the WRP low seat. I got one from WRP this spring for that $200ish price and its really nice. MUCH more comfortable than the skinz one, and half the price. Quality seems much better aswell. It also makes the axys "cockpit" feel more like the G4, the tapered seat edges make the tank and seat feel much narrower than with the stock seat. I would guess it is about 5" longer than the stocker, but I see no problems with that.
J
I am having a hard time finding a wrp in the $200 range can anyone point me to a site.
J
Thanks I for some reason didn't see that one. Kept looking at the one for 329.
About three inches shorter and two inches narrower.
This is just cutting the stock seat, correct? It looks really good.
Stay with the stock seat, I cut 1'' off the top and 1 1/2 off the sides, had a shop re staple on the seat cover. $50 visually almost no different than stock, best mod ever when your 5'7'' in high heels
Just used an electric carving knife to cut it down and shape it then stretched the stock cover back over it and re stapled. Maybe took an hour total.
R
$250 and huge shipping cost from Russia to USA
$250 and huge shipping cost from Russia to USA
Looks awesome, would be nice having the support right up by the tank like that to free up tunnel space.
R
Yes i can do with free space for underseat bag. Standart lenght of seat but lower. I will check pictures and will post it here
$250 and huge shipping cost from Russia to USA
I like it! Huge shipping cost? :face-icon-small-hap
Similar threads
