H
Hey Guys
That time of year again (actually were a bit behind schedule) to start a new sled build, this year we are starting off with two. We have built an M8 Turbo, we have built a Dragon Turbo, and last year the controversial carbed Turbo XP build (which was our favorite thus far) so we decided we would go over to the dark side We are building two Yamaha Phazers. Some may be asking why (in fact probably a lot are asking why) Well, it is something we have wanted to get out of our system for a couple years now so we are going to! The first machine will be a N/A Phazer, with a bunch of custom mods, the second will be a supercharged Phazer with a couple tricks up it's sleeve! Our goal with these machines are to make the N/A sled something that can float well, and have that kind of torque that will allow you to be lazy on the throttle and still tractor out of the deep stuff (this one is being built for my wife) The goal with the S/C machine is to build an awesome boon docking machine, one with good low end grunt and something that is very nimble, built for playing in the tree's and creek beds, with the capability to still make a pull or two.
I know we could have started with a pro rmk, slapped a turbo on it and had an awesome machine, but the point of this is to try and get out side of the box and build a fun nimble machine, that will allow us to get creative with our fabrication skills.
Anyways if your interested follow along on our blog, we will be posting as we build! http://holomis.blogspot.ca/search/label/Phazer builds
Thanks and here's to a great season
That time of year again (actually were a bit behind schedule) to start a new sled build, this year we are starting off with two. We have built an M8 Turbo, we have built a Dragon Turbo, and last year the controversial carbed Turbo XP build (which was our favorite thus far) so we decided we would go over to the dark side We are building two Yamaha Phazers. Some may be asking why (in fact probably a lot are asking why) Well, it is something we have wanted to get out of our system for a couple years now so we are going to! The first machine will be a N/A Phazer, with a bunch of custom mods, the second will be a supercharged Phazer with a couple tricks up it's sleeve! Our goal with these machines are to make the N/A sled something that can float well, and have that kind of torque that will allow you to be lazy on the throttle and still tractor out of the deep stuff (this one is being built for my wife) The goal with the S/C machine is to build an awesome boon docking machine, one with good low end grunt and something that is very nimble, built for playing in the tree's and creek beds, with the capability to still make a pull or two.
I know we could have started with a pro rmk, slapped a turbo on it and had an awesome machine, but the point of this is to try and get out side of the box and build a fun nimble machine, that will allow us to get creative with our fabrication skills.
Anyways if your interested follow along on our blog, we will be posting as we build! http://holomis.blogspot.ca/search/label/Phazer builds
Thanks and here's to a great season
