Sled is at dealer getting a 121x15x1.75 track installed. Gearing down for better spin and going over engine, drive and fuel system. Carb boot needs to be replaced. Seat is off and at upholstery shop. Cut down both sides a little and got rid of the bulge at the back. Seat trim will be 86'd. Sourced new skis, bars, risers and windshield (from a rev> may or may not work). Will pick up from a guy headed to CO from PA to pick up a chassis. Tunnel rack found on FB and being sent to me. Picking up a rev skid plate tomorrow. Will cut it down and mount it. Needs to have side panels trimmed at footwell's like all revs needed. Will also open up some larger holes in the running boards like newer sleds have. May have to reinforce the running boards, but will see as I move forward. Decals will be removed. Lots of work to do on this sled, but my 11 yr old will be stoked he does not have to ride the 2011 Expedition Sport 600ace anymore. Will leave that for the wife and 7yr old to follow us on. Plenty of winter left here in CO.
Is it possible to do the "post forward" mod on the RF like done on the Rev?