• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

2012 pro rmk 155 600 needs crank and pistons

Snowmow

Well-known member
Lifetime Membership
Mar 20, 2011
28,030
7,612
113
38
Gillette, Wyoming
2012 pro rmk with less than 1500 miles. Just had RK TEK pistons and millennium tech cylinders, MDS high comp head, reeds, Kurt’s gear down and clutching, mountain can......Dealer didn’t tighten up mag side reed boot clamp and took the rod bearing out on that side.

Motor is currently pulled from sled. Needs a new crank and pistons. Less than $1000 for a full rebuild kit from MCB performance.

Lots of good parts on it. chassis is perfect no damage, track is perfect, no tears in seat. Has a nxt level windshield bag.

$2700 obo.

f903249e3fde24a4870343f303a48467.jpg
a618ce2284bf560d26947786f03b9b5c.jpg
5a9f406e632d315097cf4e6cac3355b3.jpg
3d3a51bb46584614a80adb6b53b260a5.jpg
9dab554edf3a983a5fdfdd1f49505379.jpg


Call or txt me.

307-680-4917

Story is this was Dan Adams wife’s sled when new. I bought it in its current condition but have since found a different sled for my daughter to ride.
 
Last edited:

Snowmow

Well-known member
Lifetime Membership
Mar 20, 2011
28,030
7,612
113
38
Gillette, Wyoming
I have a brand new set of white ski loops for it and white hand guards.

Polaris tunnel bag

Cable ice scratchers

Spare belt

All would come with for $2500.
 
Premium Features