I
Did anyone read the 2 comments that people had on that article that BB posted about Rob Smith? Not real good spirited towards snowmobilers
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Yea i think it wouldn;t hurt to bring every option available with us. Yanever know what may be needed!!! i will call after i speak with JON let just figure we will need it. Thaxshad/john- if you are gonna go try to drag it out, you guys are welcome to take my saw/rope winch. I have 300' of rope.....it is not fast, but it will pull a house.
let me know if you want it, my wife will be home tomarrow, I can leave it out.
if you can get enough rope and time it will 100% get it out.
Brian (skidoomod) I could definitly use your Help. Were just trying to get a Plan formed up. The Snatch Block and rope would be a huge help. And with some type of sled for the Skid I think we could do it. We can go down the night before and Stay if that will work for you.
I'll cover anyones expenses that is willing to go down and Help me with the Recovery. Thanks John
I was just about asleep and thought since we are only going to have plug caps, would it work to wrap the exposed wire with electrical tape and then cover with silicone RTV to protect the wires from arcing? The duct tape just got hot and melted, but I've used RTV on ignition stuff while doing demolition derby and it seems to hold up to spark/heat pretty well so maybe it would work in this instance? Let me know what you guys think. The sled did start and run when we left, so if it would start and build rpm and not arc out, maybe we could drive it out.
Did anyone read the 2 comments that people had on that article that BB posted about Rob Smith? Not real good spirited towards snowmobilers
Where is this at? Anybody that has something bad to say needs his face kicked in. Please let me know.