SnoWest Snowmobile Forum

SnoWest Snowmobile Forum (https://www.snowest.com/forum/index.php)
-   Polaris: AXYS (https://www.snowest.com/forum/forumdisplay.php?f=383)
-   -   Conquer 280? (https://www.snowest.com/forum/showthread.php?t=417416)

damx 09-25-2016 03:47 PM

Conquer 280?
 
Looking very hard at the conquer 280 and questions i have will the 165 x 3.5" pitch fit the axys with just 6 tooth drivers and anti stab kit ? Also what track do you think will work better all around. 60% heavy deep coast snow, 30% light deep pow that only last a few days then sets up. 10% slush/snow mix. The 165 x 3.5" pitch or the 162 x 3" pitch.? This will be for my 16 axys with porting, pipe and a head.

Prodealer24 09-25-2016 04:19 PM

I'm curious about the Conquer 280 as well I got a 2017 axys with the 3 inch 163 curious if I have to get new drivers with the Conquer 280 or not

Robbie 09-26-2016 06:58 AM

Quote:

Originally Posted by Prodealer24 (Post 3980724)
I'm curious about the Conquer 280 as well I got a 2017 axys with the 3 inch 163 curious if I have to get new drivers with the Conquer 280 or not

Not if you get the 3" pitch one.

IQ? 10-03-2016 03:18 PM

Quote:

Originally Posted by Robbie (Post 3980849)
Not if you get the 3" pitch one.

Will a guy be able to run 6 t 3.5 pitch 165"
On stock 163" rails ??(axys)
Or will you run out of tensioner???
Whats the diameter on 6t 3.5" compared to 7t
2.86" and 7t 3"
Thanks
Edvard
VilhelminaMotorcenter

Sheetmetalfab 10-03-2016 03:21 PM

Quote:

Originally Posted by IQ? (Post 3983128)
Will a guy be able to run 6 t 3.5 pitch 165"
On stock 163" rails ??(axys)
Or will you run out of tensioner???
Whats the diameter on 6t 3.5" compared to 7t
2.86" and 7t 3"
Thanks
Edvard
VilhelminaMotorcenter

Do the math.
6x3.5=21
7x3=21

Should be the same.

Put 9" wheels on with the stock axle and it should get tight.
Or offset axle for 8" and turn it backwards.

IQ? 10-03-2016 03:48 PM

QUOTE=Sheetmetalfab;3983129]Do the math.
6x3.5=21
7x3=21

Should be the same.

Put 9" wheels on with the stock axle and it should get tight.
Or offset axle for 8" and turn it backwards.[/QUOTE]

Not considering-Should fit
Or possible might fit....
A Camso 280 retails 2000$ in sweden
But i like the idea of 3.5" pitch with less
Rods and more snow to be scooped between lugs.
Edvard

RMK935VA 10-04-2016 09:34 AM

Intrigued by the Camso Conquer track. However, I am going to wait until there are solid reviews on performance versus the stock tracks. Some concern about ratcheting with the 6 tooth driver and the 3.5" pitch track. Also, I am not sure that the increase in distance between paddles translates into better track performance. I like the light weight of it though. Reduced rotating mass is a good thing as long as they are also reliable. The 165" track with the 3.5" pitch would be a nice modification if it works as advertised. Maybe a mid winter addition.

damx 10-04-2016 09:38 AM

Ya I'm going to wait also. Its about 2400 for the track drivers and anti stab. Not sure it's worth that much to upgrade.

SRXSRULE 10-04-2016 10:33 AM

Quote:

Originally Posted by damx (Post 3983355)
Ya I'm going to wait also. Its about 2400 for the track drivers and anti stab. Not sure it's worth that much to upgrade.


How did you come up with 2400?
Drivers are 260, anti-stab 115, and the track, depending on which one you decide to go with is 900ish-1,000. Thats only 1375 US dollars or 1785 CA

Sheetmetalfab 10-04-2016 10:59 AM

Quote:

Originally Posted by SRXSRULE (Post 3983375)
How did you come up with 2400?
Drivers are 260, anti-stab 115, and the track, depending on which one you decide to go with is 900ish-1,000. Thats only 1375 US dollars or 1785 CA

Scandinavian import tax and shipping........
Isn't socialism wonderful!

damx 10-04-2016 02:06 PM

Add shipping and tax. I'm in b.c. best price on the track i found was 1350 plus tax. Drivers are 500 buy the time I get them, iv ordered avid drivers before so I know the price.

WyoPro 10-04-2016 03:35 PM

That's insane...mine will be here Friday. $780 shipped to my door.

damx 10-04-2016 03:46 PM

Ya I know it is. Good old canadian dollar

Sage Crusher 10-04-2016 03:49 PM

Quote:

Originally Posted by WyoPro (Post 3983490)
That's insane...mine will be here Friday. $780 shipped to my door.

That's not for a 162 or 165 tracks- but a good price on a short track 156..

S/C

562xp 10-04-2016 05:47 PM

156" 2.8 3.0 pitch $780.ish shipped
http://www.tracksforless.com/

WyoPro 10-04-2016 05:49 PM

Quote:

Originally Posted by 562xp (Post 3983524)
156" 2.8 2.86 pitch $780.ish shipped
http://www.tracksforless.com/

That's the one...

damx 10-08-2016 11:39 AM

Has anyone installed the conquer 280 165" on the axys 163" ? If so was there enough track adjustment with out big wheel kit or offset axel. ?

ullose272 10-08-2016 01:18 PM

Quote:

Originally Posted by 562xp (Post 3983524)
156" 2.8 2.86 pitch $780.ish shipped
http://www.tracksforless.com/

You mean 3" pitch


Sent from my SM-G900V using Tapatalk

WyoPro 10-08-2016 04:50 PM

Quote:

Originally Posted by ullose272 (Post 3984711)
You mean 3" pitch


Sent from my SM-G900V using Tapatalk

Ahh...I had somebody message me saying they couldn't find the 2.86 pitch Conquer, didn't know what they meant. So this is where the madness ensues. Good catch.


I bought the 9336M, 156" 3.0" pitch....

WyoPro 10-08-2016 04:53 PM

Quote:

Originally Posted by Sage Crusher (Post 3983494)
That's not for a 162 or 165 tracks- but a good price on a short track 156..

S/C

You're right, it'll cost you another $30 for the 162.

Sunvang 10-10-2016 02:03 PM

Has anybody recived these tracks yet? Looking into jumping on one of these.

RACINSTATION 10-10-2016 02:28 PM

We have been shipping them out every day...

ullose272 10-10-2016 04:08 PM

Quote:

Originally Posted by RACINSTATION (Post 3985320)
We have been shipping them out every day...

Have you weighed a 154x3.5p yet?

Sent from my SM-G900V using Tapatalk

damx 10-10-2016 04:20 PM

154 x 3.5p = 40 lbs. 165 x 3.5p = 43 lbs.

ullose272 10-10-2016 07:35 PM

Quote:

Originally Posted by damx (Post 3985345)
154 x 3.5p = 40 lbs. 165 x 3.5p = 43 lbs.

Real weights or advertised? Ive heard the real weights have been less

Sent from my SM-G900V using Tapatalk


All times are GMT -6. The time now is 09:27 PM.


All contents copyright 2007-2017, SnoWest Magazine, Harris Publishing Inc.