Alpha Silber turbo

[snopro11]

I don't think 50av/50-91 will get you there at 8-9. You can try, but i needed more.
New tune isn't any better than the previous one. Pretty lame of silber to let this go on this long.

What are you running for fuel mix & psi?

 

[whittaker727]

Where's JJ? What's the update on the tune for the 19? Is it fair to expect my Alpha kit to run as clean as the 850 Poo and 850 Doo? I think so. Get off your sack and answer the question.

 

[madmax]

I have enough Silber turbo 19’ cats in my group to confidently say, no it won’t.

 

[turboless terry]

The latest flash still didn't fix it? Didn't boost my 19 because of it but was thinking of doing my 20.

 

[Jesser04]

I hope it’s fixed I picked mine up from cycles and sleds this afternoon.

 

[idacatman2]

Just got the latest flash on mine and new pistons for this season hoping it is better, it did feel pretty good pulling out of the shop and into the trailer, Hoping for some seat time next week.


Sent from my iPhone using Tapatalk

 

[Matte Murder]

Why did you install new pistons?

 

[idacatman2]

2200 miles on 8lbs last season, it was a good thing I did too cause I had a small nick in the pto cylinder musta sucked something through at some point. I had the pistons so I threw them in.


Sent from my iPhone using Tapatalk

 

[Jesser04]

What do you guys have for clearance on the side panel? My padding is touching them turbo wondering if I should do something about it or just let it clearance it self.

 

[jb800]

What do you guys have for clearance on the side panel? My padding is touching them turbo wondering if I should do something about it or just let it clearance it self.View attachment 335067

Must be a cycles and sleds setup? Have any runtime on it with the boost T and blow off valve? What do you think of it so far?

 

[Jesser04]

Must be a cycles and sleds setup? Have any runtime on it with the boost T and blow off valve? What do you think of it so far?

Yes a cycles and sleds set up I haven’t had any time on it hopefully next weekend will be able to put some miles on it.

 

[jb800]

Yes a cycles and sleds set up I haven’t had any time on it hopefully next weekend will be able to put some miles on it.

Keep me posted on what you think. I purchased their clutching for my 19 silber Alpha and was very happy working with Collin. I havent put any seat time on it boosted yet. Once I do, I think I will get his turbo T/blow off valve setup. I think it would help with quick throttle response and dialing in your boost.

 

[Jesser04]

Will do! They did my good buddies 19 alpha that he rode all last year with silbers set up so I should have some good feedback we’re both running the full kit at 7lbs. Only drawback I can see is they recommend 50/50 race or av gas.

 

[Jesser04]

This is where it’s making contact.

 

[kanedog]

This is where it’s making contact. View attachment 335106View attachment 335107

You can remove the foam. Then use a heat gun to heat gun for a little extra room on the panel.

Or Silber could send it out fitting properly.

 

[Jesser04]

so am I the only one who has this issue?

 

[717 bren]

No your not , I had fitment issues with the muffler . He sent me another one and the boost hose was too short . I had to fix that one myself .

Sent from my moto g(6) using Tapatalk

 

[madmax]

Over the summer doing some general some general maintenance, I found my waste gate actuator had broken off it’s mount. Have had my alpha turbo out twice now running exactly 5lbs of boost. At 9,000 to 10,000 feet and running quite well on straight 91 pump gas.

 

[snopro11]

Over the summer doing some general some general maintenance, I found my waste gate actuator had broken off it’s mount. Have had my alpha turbo out twice now running exactly 5lbs of boost. At 9,000 to 10,000 feet and running quite well on straight 91 pump gas.

5lbs straight pump no det? You running cns weights? How much weight? Any long pulls yet? Straight 91 seems scary but I bet it runs cleaner eh.

 

[snopro11]

I sprung for the full kit. Primary and secondary springs, weights, bov, boost t and gauge. Cost was $1,100.

Sent from my SM-N950U using Tapatalk

What are you running for magnet weight? Boost? Fuel mix?