Lets see some pics of genII mods!

[JPM]

Someone elses

Saw this one at faiview somone posted this pic it a gen 2 but i am guessing the belly pan is the only stock part

 

[smv sledhead]

Don't have a picture, but do have a Gen II mod. (VE Tunnel; M10 sus; tweaked 900 cat; lightweight everything; etc.) The problem is the front is a little loose. What are the best kits to beef it up. Sorry to get off the subject a bit, but Thanks for any help. I would love to sweeten this crate up, and I"m even a Cat guy at heart...

 

[polarblu]

Saw this one at faiview somone posted this pic it a gen 2 but i am guessing the belly pan is the only stock part

LMAO well the geometry seems stock!! People have been beating up PSI engines on another thread!! How many nitrous lines do you need? Or is that the legendary bottom end with psi jugs and heads?1400 some cc?

 

[JPM]

LMAO well the geometry seems stock!! People have been beating up PSI engines on another thread!! How many nitrous lines do you need? Or is that the legendary bottom end with psi jugs and heads?1400 some cc?

Well i know the trailing arms are longer than stock to accomadate the rmi drive, so it isnt stock there. people may beat up on psi buisness practices and service but this sled won fairview 4 of 5 times there so it just takes the right person to make those engines work.

 

[freak58trio]

I believe that is Brent Linderman's sled from Artic Edge Motor Sports.

 

[JPM]

It is

I believe that is Brent Linderman's sled from Artic Edge Motor Sports.

Someone wanted to see gen 2 so i figured they might like a real fast one to look at. there is lots to the sled but thats the only pic i have

 

[Kootenay-Stomper]

this was one of my fav sleds of all time. light as hell and smoked many a turbo with it. someday Im gonna rebuild one just the way it was. (without the billet motor which I never could get to run)

what size of track on ur ride and wheels?? also trailing arms are holz??
nice sled too love it!

 

[2001rmk700]

I have a 2001 rmk 700 with 10 inch risers, single slp pipe and can , slp high flow air box, v force 3 reeds, team secondary, 19 42 gears, better boards, it is extened out 153 with a 7 tooth anit ratchets, anit stab kit, 8 inch 2 wheel big wheel kit, and a boss high rise seat. LOL AND TRUCK NUTZ THEY ADDED ATLEAST 10 HP LOL

 

[mtn junkie]

im buildeing one now its a gen II with a 1200wc motor will post pics when im done

 

[Kootenay-Stomper]

i'm doing some stuff to mine this summer/fall

151 2.52 15
looking for new shocks all round
09 inner cat wheels
VE tunnel ext
151 rails
extroverts
led tail light
snow eliminators
v-force 3 reeds
4-5'' powermad bar riser
lexan hood with lots of vents
and it has a fresh motor going in to!

not to sure on the slp head?? i ride from parking lot witch is probley 3000 to up top witch is up to 9000 feet
i think there head is 0-3000,3-6000,6-9000,9000 +

 

[instigator10]

Here ya go!

99' XC/RMK 151 Combo drivers,SLP single,SLP cheater head,Vforce,Freedom axle,Wildchild extentions,Avid 9" wheels

 

[RMK-King]

My old one, 97 RMK with Gen2 belly and hood,ported 700 with SLP pipe,reeds,balenced clutches,151 doo track.

 

[Boost Leak]

lets see that gt

 

[jaysonfreerider]

my thread has come back to life!
come on, lets see some more!

 

[mountainflatlander]

Mine: 2001 600rmk, slp twins, nx nitrous, cr tunnel, 151, boss seat, simmons skis, fox's all around, holtz rods, digatron, soon to be a ported 700

Dad's: 2001 800 rmk, 159, ported, slp head, slp race twins, cr tunnel, boss seat, simmons skis, floats all round, facraft arms, timbersled rear end, nx nitrous, fiberglass hood, simmons skis, digatron

Mom's: 1998 xc 700, cr tunnel, boss seat, slp twins,simmons skis, digatron, edge rear end, 156

Spare: 2001 600rmk, cr tunel, simmons skis, 151

 

[DWHalverson]

Very, very nice. Clean lines. Clean and grease and oil free. Just how I like them and I'm not even a Polaris guy. Regardless, very nice sleds.

Dave