PDA

View Full Version : snow tracker install question


BlazinBya
03-01-2008, 10:25 AM
:confused:My ski has the tracker kit but its flipped inside the ski and not mounted like the ones I see on the newer hawks and explorer kit,it looks like it would be better outside the ski as shown on the newer models but does it cause issues thru the brush and trees?It looks like they hang out considerably more than the ski and would tend to snag sticks and brush.Should I flip mine to the outside for better stability or leave them alone? Thanks

TKswild1
03-01-2008, 11:13 AM
Can you run the tracker on the other side of the ski, Switch the tracker's, so it run's on the outside of the carbide. or are you talking about something else Jason.

BlazinBya
03-01-2008, 11:16 AM
Thats what Im talking about,the steel plates under the carbides with the side wings.Mine stick to the inside of the ski tunnel and not to the outside like the current hawks run,its easy enough to flip them, I guess I'll try it out for our ride in the UP and see for myself.

SeattleSnowHawker
03-01-2008, 11:24 AM
Thats what Im talking about,the steel plates under the carbides with the side wings.Mine stick to the inside of the ski tunnel and not to the outside like the current hawks run,its easy enough to flip them, I guess I'll try it out for our ride in the UP and see for myself.

My 05 600 HO came with them mounted inside the ski. Switched it over for this year... Much better on trail and powder.

BlazinBya
03-01-2008, 11:25 AM
Excellent,thats what I was hoping to hear,Thanks

TKswild1
03-01-2008, 11:46 AM
In the manual they are not the same in the back as the front, so I'm thinkin your going to have to switch right from left, keeping them facing forward. Catch my drift. later Tom

TKswild1
03-01-2008, 02:11 PM
Well I flipped it around, is it alright to have that much of the tracker hanging over the ski. Kind of seem's like it would bend easily, But if all the cool kid's are doing it I will to.

snowhawkaddict
03-01-2008, 02:12 PM
are welcome to call to solve this.

Tony