A
Does anyone know if anyone makes a can for 550 trail RMK?
trail 550
- Thread starter AK800VE
- Start date
F
Aaen makes a single pipe, good for a couple of horsepower, and lose some weight.
Yup
AK, if you pick up a can for a Polaris XC it will fit. (check the stock numbers) Several company's make AM cans for the XC and they work great. Also, pull the plug where the tack should be and insert one of Florite's 4" filters. Then add two 2" Florites on each side of the dash.
At this point you can drop two jet sizes (we ride 3 - 5 K ). We left the ACC system in place.
We also dropped a gear on the sled (ours is an 06) and added a 144X2 Camoplast with a big wheel kit. You can really loosen the track up as the sled isn't prone to ratcheting.
This little sled really rips, and surprises most anyone that try's it out. It is dependable, sips gas, starts easy, and is fun.
Jerry
AK, if you pick up a can for a Polaris XC it will fit. (check the stock numbers) Several company's make AM cans for the XC and they work great. Also, pull the plug where the tack should be and insert one of Florite's 4" filters. Then add two 2" Florites on each side of the dash.
At this point you can drop two jet sizes (we ride 3 - 5 K ). We left the ACC system in place.
We also dropped a gear on the sled (ours is an 06) and added a 144X2 Camoplast with a big wheel kit. You can really loosen the track up as the sled isn't prone to ratcheting.
This little sled really rips, and surprises most anyone that try's it out. It is dependable, sips gas, starts easy, and is fun.
Jerry
A
thanks, I will look for a can for xc 600.
G
Bagger, tell us more. i ride one of these and would like to set it up for powder boon dockin.
