Sno Scoot Mod

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Oct 9, 2011

• #1

Kids Sno scoot nearing completion with 121 " track. Need to bend up a tunnel and finish up few suspension pieces. think I'll have more fun on it than my kids will. The Snosports next!
View attachment 150046

 

Last edited: Oct 9, 2011

V

volcano buster

Well-known member

Nov 26, 2007

4,221

1,613

113

Stayton Oregon

• Oct 9, 2011

• #2

Can you include some steps on how you did the "long track" conversion?

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Oct 9, 2011

• #3

Took a 121" by 16" track.
Bought an abrasive masonry blade for skilsaw.Got
Small piece of wood that will fit just inside of track nubs to keep skilsaw straight. Screwed it to skilsaw at proper offset.Cut each side.Believe its 12-1/4" (barely fits.)
Respirator a must!
Swapped out for 2.52 drivers from bravo or ovation. (Sumac Motorsports) has a good article in this section on the drivers with part numbers. They are square shaft to match up to snoscoots. I also used these drivers to longtrack an Enticer a while back.
Rails, rear wheels and tensioners and couple shafts from skidoo freestyle rear skid.
Added longer rear shock from old dirt bike i had lying around.
Had to mount wheels etc to inside of rails.

 

Sumac Motorsports

Well-known member

Lifetime Membership

Mar 3, 2009

162

52

28

Central Wisconsin

• Oct 9, 2011

• #4

SnoScoot MTX 121?????

Awsome!!!!! Good Job, more smiles on the little ones when the snow flies!!!!!!

 

Sumac Motorsports

Well-known member

Lifetime Membership

Mar 3, 2009

162

52

28

Central Wisconsin

• Oct 9, 2011

• #5

Here is the Link

http://www.snowestonline.com/forum/showthread.php?t=253795 "All the Secrets Exposed"

 

C

couch

Free Member

Nov 29, 2008

771

372

63

• Oct 10, 2011

• #6

The Sports rock with a decent track & skis.

Just waiting on new 121" x 12.25" x 1.75" track for a Sport mod!!!!! Plastic skis and skinz air frame type boards plus a wrap to be done as well ... maybe a better set of shocks too.

Anyone wanting to do this swap had better move fast as Kimpex has discontinued the 2.52" drivers for the square shaft ..... I just ordered two sets from Al's ... couldn't get them from Royal / Yamaha dealer anymore ... once you have the drivers & track and a set of doner rails its a pretty straight forward mod with great results .... kids can go just about anywhere on it now.

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Nov 13, 2011

• #7

Tunnel mounted and kids took it for it's maiden voyagen today

 

Last edited: Nov 13, 2011

V

volcano buster

Well-known member

Nov 26, 2007

4,221

1,613

113

Stayton Oregon

• Nov 13, 2011

• #8

Are the windows the same width apart on a Scoot track and a stock 121? For some reason, I thought the Scoot was narrower and that has had me baffled.

 

Sumac Motorsports

Well-known member

Lifetime Membership

Mar 3, 2009

162

52

28

Central Wisconsin

• Nov 13, 2011

• #9

Scoot's windows are narrower than a "normal" 121 track, if you convert to a 121 track use the rails from a 121 setup. The stock suspension can be used you just need to make brackets to attached the stock suspension to the wider rails. Hope this helps.

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Sep 8, 2012

• #10

Powder coated tunnel and bumper fabbed up and installed
View attachment 179666

 

Sumac Motorsports

Well-known member

Lifetime Membership

Mar 3, 2009

162

52

28

Central Wisconsin

• Sep 8, 2012

• #11

Nice

Nice!!!!

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Nov 13, 2012

• #12

Sumac Motorsports said:

Nice!!!!

Click to expand...

Final decals installed and ready for snow

 

V

volcano buster

Well-known member

Nov 26, 2007

4,221

1,613

113

Stayton Oregon

• Nov 13, 2012

• #13

Too cool.

I have one in the shop torn down, but since it isn't mine I am not going to be long tracking it.

 

C

couch

Free Member

Nov 29, 2008

771

372

63

• Nov 14, 2012

• #14

While its torn apart advise to stretch it! Amazing where the 125cc Sport can go with a decent track and plastic skis! Have one stretched to 108" with 1.25" lug and another with a 121" x 12.5" x 1.33" track .... rarely gets stuck even in 2' of powder!

 

V

volcano buster

Well-known member

Nov 26, 2007

4,221

1,613

113

Stayton Oregon

• Nov 14, 2012

• #15

This one is a scoot so only 80-85cc's.

We put plastic ski skins on it a number of years ago so that part helps. I am debating about the long track idea, but I don't have one with more than the 1/2" lug height. I'm hoping that a 12" wide track with the 1/2" lug should help a bunch over stock. Still debating on length.

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Nov 26, 2012

• #16

Just figured Tapatalk from my Iphone . Much easier to upload!

 

Last edited: Nov 26, 2012

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Nov 26, 2012

• #17

 

800tundra

Well-known member

Premium Member

Nov 29, 2007

158

52

28

Dapp, Alberta

• Nov 26, 2012

• #18

 

C

catothom

Free Member

Feb 5, 2010

773

177

43

Norway

• Nov 27, 2012

• #19

The mini C&A skis would be a perfect finish on the kids mod sled! :face-icon-small-hap

 

R

Ridin Ak

Free Member

Dec 19, 2007

221

23

18

41

snowmass village colorado/ Anchorage Ak

• Nov 27, 2012

• #20

catothom said:

The mini C&A skis would be a perfect finish on the kids mod sled! :face-icon-small-hap

Click to expand...

Very sweet sled, your kids are lucky to have a kick @ss dad like you.

yes white mini c&a skis and a white seat cover with red yamaha lettering would be the only thing I would do different.