'79 enticer 250 help

MtnMaxMod

Well-known member

Premium Member

Oct 31, 2008

637

135

43

N. Idaho

• Dec 25, 2009

• #1

i got an enticer 250 and i need some help troubleshooting a problem...

it will run, but only if i pour gas down in the cylinder then it dies. the carb is bone dry..so it's not getting fuel. i got a new fuel line in and cleaned the carb and jets..i'm stumped.

 

S

SD Coyote

Free Member

Dec 27, 2007

312

72

28

Aberdeen, SD

• Dec 25, 2009

• #2

If your carb and fuel lines were dry, you may not have enough fuel in the tank to get fuel to the fuel pump. You have to have the tank fairly full for it to flow to the fuel pump. It could also be a dirty fuel filter in the tank.

 

M

M-Max

Free Member

Jan 15, 2008

63

2

8

Whitehorse Yukon

• Dec 25, 2009

• #3

sounds like a cracked diaphram in the fuel pump.
easy rebuild, just make sure all the pieces go back in - in the same order.
also check the pulse line between the engine and fuel pump

 

Jeff C

Well-known member

Lifetime Membership

Jul 4, 2001

2,271

1,009

113

59

Mahtomedi, MN

• Dec 28, 2009

• #4

M-Max said:

sounds like a cracked diaphram in the fuel pump.
easy rebuild, just make sure all the pieces go back in - in the same order.
also check the pulse line between the engine and fuel pump

Click to expand...

X2

Rebuild the fuel pump...........

Rediculously easy to do. Get a kit and do it..........

Pulse line bad? The old lines crack or break off. Get a $.25 piece of line and rebuild it.......