S
Does anyone have pictures of revs with aftermarket bars on them?
Pics of aftermarket bars.
- Thread starter Sasksummit
- Start date
E
here's a few I have done:
'06 REV
03.5 REV
'06 REV
03.5 REV
E
yep, 440 throttle block and 440 kill switch
F
Fabcraft
These are high rise Fabcraft bars with a 2" riser.
Crappy cell phone pic.
These are high rise Fabcraft bars with a 2" riser.
Crappy cell phone pic.
S
Thanks for the pics guys.
J
Enis, how did you mount your controls? whats holding them there? - thanks
E
the force..........
hahhha! ok sorry! hahah
big ol ziptie
works fine and cleans up the bar
S
here is my 07 rev with rsi race handlebars
M
I kept the stock 'x' bars and went with Mahler risers. Best in the industry.
R
here is my 07 rev with rsi race handlebars
do your hand warmers still work with those RSI grip wraps on them?
no picts of mine but you could see them in person lol, im from lloyd also. fly racing 8'' riser powdercoated flat black with a set of fly racing carbon fiber mountain bars.
S
no they dont because i bought the bent handel bars but you can but replacement ones the produce more heat than the old ones.
Thats what I have on mine.
http://www.rsiracing.com/
.jpg)
Thats what I have on mine.
http://www.rsiracing.com/
D
Just some high rise fly bars, hadguards and a CMX throttle system
Last edited:
B
no they dont because i bought the bent handel bars but you can but replacement ones the produce more heat than the old ones.
Thats what I have on mine.
http://www.rsiracing.com/
How do you like that setup? I was thinking of going the same route with the backcountry bar bend.
S
I like it a lot they were very easy to install and they heat a lot better than stock
fly mini bends and 6 inch fly risers
What have people done with the switches? I want to move mine from the handlebars and need a mounting location. I have a temp and fuel guage in the spare holes on the dash already. Need some ideas, either mounting the entire pod as is or swapping over to toggles. Any ideas would be appreciated.
K
If you have a tall enough riser you can mount inside the riser.
Similar threads
