During search training, avalanche transceivers of the Ortovox
3+ model switched to transmission mode unintentionally after 120 seconds in
search mode. Internal tests showed that a certain production batch of the 3+
can exhibit this behavior.
Ortovox is responding immediately and, as a precaution, is recalling
all devices shipped to vendors after Oct. 17, 2012, for inspection and a
software update. These devices can no longer be used without an update.
Please determine if your device is affected by checking the serial number of
your device and entering it in the box (see the link below): The 10-digit
number will appear on the display 2 digits at a time when the 3+ is switched
For further support, please get in touch with the Ortovox hotline:
+49 89 666 74 212 or drop them a message: email@example.com
To check to see if your beacon is affected by this recall, GO
It should be noted that this recall does not affect any Ortovox transceivers sold in North America.
posted Tuesday, Dec 11 2012 11:04 AM
On Ortovox's home page it says the recall doesn't effect north america. You might want to add that bit of information to this article http://www.ortovox.com/3585--home.html
Comments that contain personal attacks or excessive vulgarity are subject to removal at SnoWests' discretion.
Please keep it clean and worth reading.