Clutching - Clutch kit for 2001 and older w/spline shaft information

Owners of 99~2001 600/700/800 with spline secondary jackshaft here is some info if you are looking to do a clutch kit.
I don’t make a clutch kit for the formula secondary model. I do however make a nice kit if you were to remove the formula secondary and install an HPV-27 secondary.
The HPV real name is High Performance Vehicle - affectionately nicknamed the RER secondary.

Every week I browse the internet finding guys the newer skidoo secondary for their older iron.
Have a read of this link....
Topic: 00,01,02 600/700/800

Must sign up to read it (had to do it this way because of viagara spammers), then you are able to read the post.

With the secondary clutches below, all you have to do is take the secondary apart and remove one shim from inside of it.
Part #55
...then reassemble the secondary. You have now taken the secondary from 1.5" belt width down to your original 1-3/8 belt width.

Ebay motors
Item #
330376423119
180434161580
230400906913
230400909668
390120504113
380179558248
130346315013
160379996950

The kit will come with 160/350 primary spring, dalton pinweights, purple doo secondary spring from 800 summit and SMT helix.