F
Hi! I've done the relocation switches last season on my M8 with no problems. Removed all the cat's one and installed an ON-OFF-ON for low and high beams.I've connected the red/black , the blue and the white wires in the new switch. No more lights now and have sometimes VOLT on gauge when i start it.
I've found that the yellow wire from the regulator is for lights and when i tried to disconnect it, it was very hard . The yellow connector only was rusted(or maybe burnt??). I don't want to put a regulator each year or burn something else so what's the good way to plug the lights switch?
Thank's!
I've found that the yellow wire from the regulator is for lights and when i tried to disconnect it, it was very hard . The yellow connector only was rusted(or maybe burnt??). I don't want to put a regulator each year or burn something else so what's the good way to plug the lights switch?
Thank's!