Gauge stopped working

ippielb · Mar 15, 2016

My gauge has stopped working, it lights up but does not show any information.

Before it stopped working it did say CCU at one point. But after it said that, it stopped working. No idea on codes or anything.

Coldfinger · Mar 15, 2016

If u have not tried disconnecting and reconnecting, try that.

ippielb · Mar 15, 2016

Coldfinger said:
If u have not tried disconnecting and reconnecting, try that.

Do you have to do it while the sled is running? Is that how you reset it? I have been working on the sled for a month doing some work.i checked all my wiring and grounds all appear good.

izzni · Mar 16, 2016

Likely moisture damage to the circuit board of the gauge. I've observed the same symptoms on deluxe gauges quite often. Not repairable on a standard gauge.

ippielb · Mar 16, 2016

There is some condensation on the glass of the gauge, a shame since it's only got 700 miles on it.

wastedeep · Mar 16, 2016

water

I have a m8 that did the same thing today
I unplugged the main harness plug. The seal was not right and had let in snow.
So I blew it out , fixed the seal,plugged it back together and it worked like it should.

ippielb · Mar 20, 2016

Never touched the thing, moisture still behind the gauge, started my sled yesterday to bring back into the shop and the gauge worked, no CCU code, no flashing, showed my rpm, and my speed. I think I'm going to take it off and throw it in some rice, take it apart and put some of those moisture absorbing packets inside it.

Search

Gauge stopped working

ippielb

Free Member

Coldfinger

Well-known member

ippielb

Free Member

izzni

Well-known member

ippielb

Free Member

wastedeep

Free Member

ippielb

Free Member

Similar threads