Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
16.5 mm is the measurment you want. That is ski doo spec.
Fill gas tank to the top, burp it and top it off. Mark your oil level before you ride. After ride measure how much oil you use to fill it back up to that mark. Fill your sled up with gas back to full, burp it and fill it some more to top it off at the gas staion. You will now have your fuel to oil ratio. It should be somewhere around 35 to 1 to be safe. Some guys lean it out to 40 to 1.
18.5mm with full syn
So now I'm confused. I thought the more slack you have in your cable the lower the ratio or less oil consumed? I have an 08 and over the summer I installed a new cable and I am using a ton of oil per ride almost half tank and still have fuel. I am out of adjustment and I can barely get 16 or less of slack. I was thinking i got the wrong cable and need to install yet another one so I have adjustment. Or I could be totally off base and just need to take out the slack. Any thoughts?