E
I have a 94 Ovation would like to put a longer track under it. Is there any stock parts from another sled that would fit it.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
So, if an Ovation is a 108 inch track which has 3.29 pitch drivers which are 5.5 inches in diameter, and you want to go to 121 or 136 inch track, which is 2.52 pitch, then the easiest place to start would be to keep your current 1 inch hexagonal drive shaft and find new 5.5 inch diameter drivers that are 2.52 pitch, am I correct? I am asking because I have no experience in this, but am also interested in a similar mod. If this is correct, then is it possible that the drivers(sprockets) off of a Bravo LT or a Phazer LT which I believe are 136 inch, might be the 5.5 inch, 2.52 pitch, 1 inch hex hole, that you are looking for. Is there anyone out there with a stock 136 Bravo or Phazer that can measure the outside diameter of their drivers and the diameter of the hex driveshaft to confirm that these will work?