Rivets

Volvokvaloya · Aug 28, 2014

What rivets do you guys use when replacing tunnels or bumpers..aluminium or steel rivets..and what size..i measured 4,3-4,4mm diameter holes.
I need some black ones since I have a Nightfire edition.

arctic2009 · Aug 28, 2014

steel rivets, and 3/16" diameter. Length depends on location of where you will be riveting. PN from cat for a black rivet used in the tunnel is 8060-504

boondocker97 · Aug 28, 2014

It seems that cat switched to a rivet just smaller than 3/16". Metric? Not sure what year they started that. The ones that hold the coolers in the corners of the tunnel seemed to be slightly smaller yet. I always just ream the holes to 3/16 and use Napa rivets when I can on bare aluminum. Steel ones are needed. I tried using aluminum ones once on a rear tunnel section and they didn't last more than a couple seasons before they got loose. For black ones I think you are stuck going through Cat. Get the rivets first and measure them.

skidooboy · Aug 29, 2014

Yamaha makes a "ringed" rivet, that has washer type rings in it in several areas to match the thickness you are working with, to tighten the components better than most other rivet styles. Ski

arctic2009 · Aug 29, 2014

I have found that if you buy cheaper quality rivets they are not always spot on with their diameter. Steel quality rivets fit in the 3/16" hole just fine. Ive rebuilt 4 dfferent M series/crossfire chassis and used all 3/16" rivets and 5/32" rivets for the tunnel coolers.

Volvokvaloya · Aug 29, 2014

ok so its 3/16 in the chassie/tunnel and 5/32 in the tunnel cooler..good to know.
Now i only need to find black steel ones...anyone know if Polaris/BRP/Yamaha make some?

arctic2009 · Aug 29, 2014

buy the cat ones, 8060-504 thats the black rivet.

Volvokvaloya · Aug 29, 2014

Ok,Thanks! Are they steel?

arctic2009 · Aug 29, 2014

yes...

kanedog · Aug 29, 2014

Stavex rivets. They are structural. Get them at rivet stop online.

Rixster · Aug 31, 2014

3/16 stainless

ilovepowder · Sep 2, 2014

use stainless unless you like rusty rivets.

DO NOT USE ALUMINUM they are to weak

Volvokvaloya · Sep 2, 2014

Does the oem cat rivets rust?

arctic2009 · Sep 2, 2014

Volvokvaloya said:
Does the oem cat rivets rust?

Ive never had an issue with them rusting.

Search

Rivets

Volvokvaloya

Member

arctic2009

Well-known member

boondocker97

Well-known member

skidooboy

Well-known member

arctic2009

Well-known member

Volvokvaloya

Member

arctic2009

Well-known member

Volvokvaloya

Member

arctic2009

Well-known member

kanedog

Undefeated mountain clutching champ of the world.

Rixster

Well-known member

ilovepowder

Member

Volvokvaloya

Member

arctic2009

Well-known member

Similar threads