K
2014 Pro 800, 2,000 miles. Sled is stock engine wise except for a can. I also run about 1.5 gal. of AV gas per tank. Started getting a check engine light on Saturday and when the CEL would come on it would only run on one cylinder. Wouldn't rev high enough to engage the clutch when the CEL was on either. It would idle perfect, ran on both cylinders. Tried changing plugs but that didn't fix it. The CEL would go off randomly and it would run perfect again. This happened 5-6 times. Any ideas what to check? Not sure how to pull codes without taking it to the dealer. Any ideas are appreciated.