Clutching or Carb Phazer II Problems?

What elevation are you running at? It sounds like you may need to change weights or springs. Is the sled in stock form? These sleds always performed well.

[ok you need to check the carbs, and by that i mean,..where you adjust the idle there is a big plastic nob, under neath that there is a timing adjustment thing, unplug that stupid thing and route the wires from the stator to it, into themselves so that it makes a loop back to the stator, these wires are black strip on yellow. i do this with everyone i get, your problem will be solved, also if your mechanically inclined, take out the fuel pump and rebuild it, also a common issue when regarding high rpms

rupp76 said:

On Phazer-I/II
Where you adjust the idle there is a big plastic nob,
under neath that there is a timing adjustment thing,
unplug that stupid thing and route the wires from the stator to it,
into themselves so that it makes a loop back to the stator,
these wires are black strip on yellow.
I do this with everyone I get, your problem will be solved.

Click to expand...

Never heard of this
Must check it on daughter's Phazer-II ( 1991 )