Im wanting to pull the primary off my 09 m8 and do not have a puller does any one know what the thread size in the clutch is so i can get a bolt and hydraulic it off/ Thanks
CLUTCH THREAD SIZE 09 m8
- Thread starter Hardass
- Start date
For the stock primary I believe it's a 9/16" fine thread.
9/16-18 won't fit hmmm
I think, some guys were using there own clutch bolts with Teflon tape, oil, water grease ect.. to hydraulic it off? Ski
I
09 should be the 9/16 but if the clutch has been replaced (pretty common on Cat) it will be 14mm metric. See if there's a manufacturing date on the clutch cover.
14x 1.50
I
Yup, if it's a 2010 or newer model clutch. FYI the spiders also changed in 2010. I believe they're metric also.
Similar threads
