Something is wrong! That sled should be bouncing off the rev limiter with 70s! They came wih 75s bone stock with high altitude clutching! 7200 is good with stock pipe but to low for a slp pipe! It likes 7500-7600! &7700 on a speedwerx Trust me! You need to look at a new Primary spring more then likely! Also id say check compression or take pipe off and look down Y-pipe! You may have a fried top end! You should be pulling every bit of 80s! what are the numbers in your Bd box?? what angle is your secondary?
This M1000 should be right with or Kick those Xms Asses depending on the Guy riding it! Modified 1000s are very capable machines when set up right! They can give pg turbos a good run!
