PDA

View Full Version : Polaris Quick Drive Pulley Installation Tools


Big Ling
01-05-2013, 08:15 PM
Our Happy Face alignment studs are location specific, meaning that the lower drive shaft stud is short and the upper stud is much longer,
with a shallow angle which makes the belt installation much easier.

Also, we machine a 17 M.M.hex on the out side end of both studs so that you can use the same size wrench as the drive shaft bolts and to adjust your track.

We also are now producing the alignment studs in a lightweight version that are made from 7075 aluminum that has been type III hard anodized
The weight difference is 50.5 grams on our light weight studs to 201.5 grams for the stainless steel.

These light weight studs are easy to bring along when riding yet they will still have all the, features that set our products apart.

For those that are running the earlier style drive shafts we have made install studs that have a 3/8"-24 thread to fit those 2006 – 2009 shafts.

Note:
Our install tools are a one piece design that are machined on state of the art CNC equipment that maintains the highest quality products.

Stainless are $49.00 + shipping,
Light Weight Anodized Aluminum $49.00 + shipping.
We have both of these products in stock and can ship large quantity's to single orders.

http://www.snowestonline.com/forum/images/icons/icon1.gif RE:Install tool differances
When shopping for belt install tools please take the time to note the differences in
the various designs while they all are much better than nothing.
Our one piece design.offers distinct advantages over the two piece style.
As they do not need extra tools if you are out on the trail there is no loose screw to drop in the snow or get lost.

Mention SnoWest Forum to recieve 10% discount

Dealer pricing availible

Added top right picture of Polaris studs for comparison

Link to install tips

http://www.snowestonline.com/forum/showthread.php?t=332656

Big Ling
01-13-2013, 01:09 PM
When shopping for belt install tools please take the time to note the differences in
the various designs while they all are much better than nothing.
Our one piece design.offers distinct advantages over the two piece style.
As they do not need extra tools if you are out on the trail there is no loose screw to drop in the snow or get lost.

Big Ling
09-09-2013, 11:59 AM
We have these Quick-Drive Belt Install Tools good in stock in both
Lightweight hard anodized 7075
316 stainless

Big Ling
10-09-2013, 01:04 AM
Happy Face is pleased to announce that we now have Quick-Drive Belt install
studs that will accommodate the redesigned upper jack-shaft on the 14 Pro's.
Available and ready to ship in either the lightweight hard anodized 7075 or S.S.
These are sold both separately and as a set

Big Ling
11-07-2013, 06:02 PM
Instructions for their use are now on our website.

http://happyfacepp.com/polaris-quickdrive-belt-install-happy-face-pulley-install-tools/

Big Ling
11-20-2013, 04:56 PM
We're down to less than a dozen of the 2013 specific Aluminum Install Tools! These have the best fit and finish for those of you with '13 sleds. Yes, you will be able to use our updated '14 tools on your '13.


Grab your Aluminum '13 Install Tools off our website, before their gone forever.

Big Ling
01-08-2014, 08:16 PM
In response to a steady interest in the model year 13 specific Q-D install studs will continue to be produced in both the S.S. and hard anodized for those needing them
Thanks again for all the support for our products

Big Ling
02-11-2014, 12:14 PM
For anyone in Canada looking to purchase our Happy Face tools or products please check with http://www.rainycreekpowersports.com/ in Eckville, Alberta (403) 746-5000
As they should have our tools available thus you should be able purchase from them and not have to wait for your orders to go thru customs
Thanks again

Big Ling
03-14-2014, 10:37 AM
TTT

Big Ling
05-21-2014, 11:40 AM
These are still good in stock
Thanks Guys

Big Ling
09-08-2014, 03:49 PM
TTT

Big Ling
11-20-2014, 09:36 AM
There is not any difference for the 2015 Pros we have these in stock .
Thanks again

A.B.R.
12-19-2014, 05:39 AM
just ordered a set. thanks